max 9.9 16.9 0.05 + max 0.390 0.10 ref. 0.667 0.020 -0.002 +0.004 0.5 - 0.374 9.5 0.00 +0.10 0.10 11.1 ref. 0.438 5.8 0.004 0.229 3.6 0.142 -0.000 +0.004 0.2960.012 7.50.30 sealing gasket silicone 4-40 unc 2 plcs 25.00.13 21.1 0.831 0.9840.005 1.551 39.4 0.10 0.6 0.004 0.024 0.1000.012 2.50.30 0.3390.010 8.60.25 max 18.3 0.010 0.25 max 5.0 0.197 0.722 0.323 8.2 detail a scale 8 : 1 0.040 1.0 e - o ring size changed - sept 28,07 - a.g. d - staking added: not approved by customer - june 16,07 o-ring 2.0mm x i.d. 27mm f tightening torque added - oct23,07-a.g. c - updated materials - 2006/08/18 - yk. b - chg solder tails - 2006/07/19 - yk. a - updated notes - 2006/06/16 - yk. notes: 1. material: - shell: zinc alloy 50 micro inch minimum nickel plating. - contacts: copper alloy 30 micro inch gold over 50 micro inch nickel plating. - insulator: thermoplastic polyester resin (dsm) 94v-0 flammability rating. - gaskets: silicone rubber s7001r, 70 durometer. - sealing compound: stycast 2651 with catalyst 11 2. features: sealed connector in the mated and unmated conditions. 3. operating temperature: -40 c to +105 c. 4. environment performance: ip67. 5. part is rohs compliant. 6. rear seal to withstand temperature exposure of solder bath 265 c for 8 sec & solder preheat 150 c for 180. 7. sealed to with pressure up to 5 psi after high temperature exposure. 8. recommended torque for screw tightening: - steel screw with more than.090" of thread engagement: 4.0 to 5.75 in-lbs - brass screw : 3.1 to 4.5 in-lbs amphenol part number: mdb-e09pe-860 two stage potting metal die cast outer shell 3:1 d c b a a b c d ref. scale size project dwg. no. c sheet rev. date approvals drawn designed checked qa app'd material and finish 1 2 3 4 5 6 7 8 8 76 54 32 1 e f e f ie app'd dwg app'd title amphenol canada corp. f 2006/07/24 or used for manufacturing purposes without permission from amphenol canada corp. code ident. no. y.kuzyk 1 of 2 P-MDB-E09PE-860 - this document contains proprietary information and such information may not be disclosed to others for any purpose do not scale drawing mdb 2006/07/24 .25 09 pin connector 2006/07/24 s.semenov unless otherwise specified dimensions are in millimeter tolerances are: decimals angles .xx .10 1 .x rev - descript - date - apprvd
0.794 min 20.2 min 10 pcb layout 0.984 0.2760.004 7.0 0.10 11.0 0.004 0.432 2.7 0.004 0.108 0.10 0.10 0.10 2.8 0.004 0.112 0.10 1.4 0.004 0.056 0.13 25.0 0.005 0.004 0.10 1.4 0.004 0.122 0.054 0.10 3.1 0.035 -0.000 +0.004 0.9 0.00 +0.10 25.0 3.3 max 0.13 min 11.3 min 0.444 typ. max 0.130 r 0.9840.005 0.125 2 holes 3.2 existing panel cutout d c b a a b c d ref. scale size project dwg. no. c sheet rev. date approvals drawn designed checked qa app'd material and finish 1 2 3 4 5 6 7 8 8 76 54 32 1 e f e f ie app'd dwg app'd title amphenol canada corp. do not scale drawing this document contains proprietary information and such information may not be disclosed to others for any purpose or used for manufacturing purposes without permission from amphenol canada corp. code ident. no. y.kuzyk s.semenov P-MDB-E09PE-860 - unless otherwise specified dimensions are in millimeter tolerances are: decimals angles .xx .10 1 .x .25 2006/07/24 09 pin connector 2006/07/24 2006/07/24 mdb f 4:1 2 of 2 rev - descript - date - apprvd
|
